Month: July 2014

Building A New Home Lab – Phase 1

I have big goals set for this year and one of the things I need to archive these goals is a home lab to train on OpenStack, network virtualization, hypervisor networking, and just virtualization in general. In this post I will be sharing some details on my new home lab which I’m in the process of building.

For me the one thing I was trying to avoid was investing in physical hardware as I don’t have much space at the moment to place the servers. So far I have managed to run everything in Virtual Machine (VM) form factor. However as the lab grows I will probably need to invest in some physical servers.


Few Upgrades First

Before deploying any VMs I had to do some upgrades:

 – Upgraded from VMware Fusion 4.0 to 6.0 Professional on my iMac which is 30% faster than 4.0 and supports creating additional virtual networks (similar to Network Editor in VMware Workstation)

– Upgraded my iMac memory from 12GB to 16GB to make room for additional VMs


Spinning Up VMs

I then deployed the following VMs:

A Cisco CSR 1000v router as an internet gateway where I do packet filtering and run IPSec VPN with my cloud provider.

– 2 x VMware ESXi 5.5 hosts running on Fusion for VM mobility, HA, etc..

 – VMware vCener 5.5 server running on Windows 2008 server to mange the two ESXi hosts (I will be also trying the vCenter virtual appliance shortly)

– Windows 7 VM to run the vSphere Client and run other monitoring/debugging tools. 

I will be sharing over the next few weeks some interesting use cases I have been working on. Make sure to subscribe to the blog to get notified when I add new content.

Let the fun begin!

Homelab


Share This:
Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

Spin up Cisco CSR 1000v in VMware Fusion in 5 Minutes

I have been using the Cisco CSR 1000v as a default gateway in my home lab and I run an IPSec tunnel & LISP between it and my cloud provider (more on LISP in a separate post). The CSR 1000v runs on VMware ESXi, Microsoft Hyper-V, and Amazon Xen hypervisors but it can also run on a laptop/desktop hypervisor like VirtualBox or VMWare Fusion for testing or training purposes.

In this post I will show how to spin up a CSR 1000v instance in VMware Fusion for Mac.


Requirements:

1) I’m running VMWare Fusion 6.0 Professional but you can also run this virtual router on Fusion 4 or 5. I highly recommend using Fusion 5 Professional or 6 Professional if you want to create additional networks and assign the CSR 1000v interfaces to those networks. The feature to add additional networks (similar to Network Editor in VMWare Workstation) was added by VMWare in Fusion 5 Professional and it’s not available in the standard edition of Fusion. Alternatively if you don’t want to pay the extra bucks for the Professional edition, you can use this free tool from Nick Weaver to create the networks if you are running the standard edition. Nick’s tool isn’t the best but it does the job.

2) Go to Cisco and download the latest and greatest software version of the CSR 1000v. The CSR runs Cisco IOS XE and you need to download the OVA package for the deployment.

 
Installation:

The installation process is simple and quick:

1- Launch Fusion and go to File -> New from the top bar menu

2- Once the Installation wizard starts click on More options.  Select Install an existing virtual machine and click Continue.

3- On the next screen click Choose File. Navigate to the folder containing the OVA package, select the file, and click Open and then Continue.

4-  The next window will ask you to save the VM name, choose a name and click Save.

5- The final step of the wizard is to either customize or click fire up the VM. The CSR 1000v by default comes with three interfaces. If you need to add more interfaces click on Customize, otherwise click Finish.

Finish

 
6- Once you click Finish, the CSR 1000v will boot a couple of times and then you will be in traditional Cisco router User Mode.

 
Interfaces Management:

Enter Exec mode and enter “show ip int bri” to see the three interfaces. 

CSR interfaces

 

By default interfaces will become part of the Ethernet or WiFi network (that’s done by Fusion) depending on which adapter is active during the installation and you can assign from here IP interfaces and default gateway.

Adapter setting

 

If you wish to put the interfaces on separate networks (VLANs), select the CSR VM and go to Virtual Machine -> Setting and choose the desired Network Adapter. You may also create custom networks by going to VMWare Fusion -> Preferences -> Network. From there add the + sign to add additional network and choose wether to enable DHCP or not.  

Add network


Activating The License

In order to enable the full features of the CSR 1000v, you need to purchase a license from Cisco. If you want to try the full features before purchasing, Cisco offers 60 day free trial license. To activate the free trial license, go into the router configuration mode and enter: license boot level premium. You will be asked to boot the router after you enter the command.   

 


Share This:
Facebooktwittergoogle_plusredditpinterestlinkedintumblrmail

© 2017

Theme by Anders NorenUp ↑